Exeltech XP125 125W 220V 120V Inverter Pure Sine Wave Inverter

Exeltech XP125 125W Pure Sine Wave Inverter

XP 125

Features

Comments

True Sine Wave
125 Watts AC Output
12Vdc up to 108Vdc Output
Designed for Electronics
Ultra Lightweight
21.5 Years MTBF

If you use a surge protection device to protect your electronic from the approximately 80 voltage spikes per day, received from the average electric company, don't trust those same electronics to the quasi sine wave power provided by most of the inverters on the market today. They deliver 120 voltage spikes per second, can cause equipment to malfunction, or be damaged, and in some cases, voids the warranty. Trust the accurate, efficient operation of your electronics to true sine wave inverters for 0 spike ANYTIME.

Model Number	Description
XP1-1-1-6	125 Watt 12 VDC In 120 VAC / 60 Hz Output
XP1-1-2-6	125 Watt 24 VDC In 120 VAC / 60 Hz Output
XP1-1-4-6	125 Watt 48 VDC In 120 VAC / 60 Hz Output
XP1-3-1-5	125 Watt 12 VDC In 230 VAC / 50 Hz Output
XP1-3-2-5	125 Watt 24 VDC In 230 VAC / 50 Hz Output
XP1-3-4-5	125 Watt 48 VDC In 230 VAC / 50 Hz Output
XP1-1-1-4-1	125 Watt 12 VDC In 120 VAC /400 Hz Output
XP1-1-2-4-1	125 Watt 24 VDC In 120 VAC /400 Hz Output
XP1-1-4-4-1	125 Watt 48 VDC In 120 VAC /400 Hz Output
Other frequencies and voltages available

Output Power

Continuous Power	Surge Power	No Load Power	Output Voltage	Output Current	Weight (lbs)
125W	150W	5W	100	1.2	2
125W	150W	5W	117	1.1	2

Input Power

Model Voltage	Minimum (Typical)	System (Typical)	Maximum (Typical)	Typical Efficiency @ Full Power	Peak Efficiency @ 1/3 Power
12V	10.4/10.6V*	13.8V	16.5V	85%	87%
24V	19/21V*	27.6V	33V	87%	89%
32V	26.5/28V*	36.8V	44V	87%	89%
48V	41.5/42.5V*	55.2V	62V	87%	89%
66V	57.5/58.5V	75.9V	91V	88%	90%
108V	94/95V	125V	149V	88%	90%

*Shutoff Voltage/Buzzer Voltage

General

Conditions	Minimum	Typical	Maximum
Waveform	-	Sinusoidal	-
Voltage Output	-5%	Nominal	+5%
Line Regulation	-	0.1%	0.5%
Load Regulation	-	0.5%	1%
Distortion	-	1.5%	2%
Frequency	-0.1%	Nominal	+0.1%

Mechanical

Width	Height	Depth
4.65"	2.00"	6.75"

CAD Drawing

EXELTECH XP125 Mechanical Diagrams Pure Sine Wave Inverters

PROTECTION CIRCUITRY

*Over Voltage: Shut off at maximum input voltage, per input conditions.

*Under Voltage: Shut off at minimum input voltage, per input conditions. Warning buzzer sounds before shutoff.

*Thermal: 105ºC internal temperature. warning buzz 5ºC before shut off.

Output Short: Units shuts off and must be manually reset.

ENVIRONMENTAL

Temperature: -25 to 30ºC full power derated above 30ºC.

Humidity: 5 to 95% non condensing.

Altitude: -200 to 10k feet full power, derated above 10k.

Audible Noise: Less than 45dbA.

Cooling: Convection cooled.

Finish: Anodized aluminum.

Warranty: Full year parts and labor.

Extended Warranty: 5 year repair or replace unit for $50 per occurrence.

EXELTECH Pure Sine Wave Inverter Part Numbering System

Step 1: Model number always starts with XP.

Step 2: To designate wattage enter the single character code from the wattage chart below.

WATTAGE CHART

Wattage 125 250 600 1100

Designation 1 2 6 K

Step 3: To designate output voltage enter the single character code from the Vac chart.

Vac OUTPUT VOLTAGE CHART

AC Volts 100 120

Designation 0 1

Step 4: To Designate input voltage enter the single character code from the Vdc Chart.

Vdc INPUT VOLTAGE CHART

DC Volts 12 24 32 36 48 66 108

Designation 1 2 B 3 4 E I

Step 5: To designate AC frequency enter the single character code from the AC frequency chart.

AC FREQUENCY CHART

Frequency
50Hz

60Hz

400Hz

Designation
5

6

4