Exeltech XP250 250W Inverter Pure Sine Wave Inverter

Exeltech XP250 250W Pure Sine Wave Inverter

XP 250

Features

Comments

True Sine Wave
250 Watts AC Output
12Vdc up to 108Vdc Output
Designed for Electronics
Ultra Lightweight
21.5 Years MTBF

If you use a surge protection device to protect your electronic from the approximately 80 voltage spikes per day, received from the average electric company, don't trust those same electronics to the quasi sine wave power provided by most of the inverters on the market today. They deliver 120 voltage spikes per second, can cause equipment to malfunction, or be damaged, and in some cases, voids the warranty. Trust the accurate, efficient operation of your electronics to true sine wave inverters for 0 spike ANYTIME.

Model Number	Description
XP2-1-1-6	250 Watt 12 VDC In 120 VAC / 60 Hz Output
XP2-1-2-6	250 Watt 24 VDC In 120 VAC / 60 Hz Output
XP2-1-4-6	250 Watt 48 VDC In 120 VAC / 60 Hz Output
XP2-3-1-5	250 Watt 12 VDC In 230 VAC / 50 Hz Output
XP2-3-2-5	250 Watt 24 VDC In 230 VAC / 50 Hz Output
XP2-3-4-5	250 Watt 48 VDC In 230 VAC / 50 Hz Output
XP2-1-1-4	250 Watt 12 VDC In 120 VAC /400 Hz Output
XP2-1-2-4	250 Watt 24 VDC In 120 VAC /400 Hz Output
XP2-1-4-4	250 Watt 48 VDC In 120 VAC /400 Hz Output
Other frequencies and voltages available

Output Power

Continuous Power	Surge Power	No Load Power	Output Voltage	Output Current	Weight (lbs)
250W	300W	6W	100	2.5	5
250W	300W	6W	117	2.1	5
250W	300W	7W	230	1.1	5

Input Power

Model Voltage	Minimum (Typical)	System (Typical)	Maximum (Typical)	Typical Efficiency @ Full Power	Peak Efficiency @ 1/3 Power
12V	10.4/10.6V*	13.8V	16.5V	85%	87%
24V	19/21V*	27.6V	33V	87%	89%
32V	26.5/28V*	36.8V	44V	87%	89%
48V	41.5/42.5V*	55.2V	62V	87%	89%
66V	57.5/58.5V	75.9V	91V	88%	90%
108V	94/95V	125V	149V	88%	90%

*Shutoff Voltage/Buzzer Voltage

General

Conditions	Minimum	Typical	Maximum
Waveform	-	Sinusoidal	-
Voltage Output	-5%	Nominal	+5%
Line Regulation	-	0.1%	0.5%
Load Regulation	-	0.5%	1%
Distortion	-	1.5%	2%
Frequency	-0.1%	Nominal	+0.1%

Mechanical

Width	Height	Depth
5.23"	2.77"	10.38"

CAD Drawing

Diagram of XP250 Exeltech Pure Sine Wave Inverter

PROTECTION CIRCUITRY

*Over Voltage: Shut off at maximum input voltage, per input conditions.

*Under Voltage: Shut off at minimum input voltage, per input conditions. Warning buzzer sounds before shutoff.

*Thermal: 105C internal temperature. warning buzz 5 C before shut off.

Output Short: Units shuts off and must be manually reset.

ENVIRONMENTAL

Temperature: -25 to 30 C full power derated above 30 C.

Humidity: 5 to 95% non condensing.

Altitude: -200 to 10k feet full power, derated above 10k.

Audible Noise: Less than 45dbA.

Cooling: Convection cooled.

Finish: Anodized aluminum.

Warranty: Full year parts and labor.

Extended Warranty: 5 year repair or replace unit for $50 per occurrence.

XP series model number XP-__-__-__-__

Step 1: Model number always starts with XP.

Step 2: To designate wattage enter the single character code from the wattage chart below.

WATTAGE CHART

Wattage 125 250 600 1100

Designation 1 2 6 K

Step 3: To designate output voltage enter the single character code from the Vac chart.

Vac OUTPUT VOLTAGE CHART

AC Volts 100 120 230

Designation 0 1 3

Step 4: To Designate input voltage enter the single character code from the Vdc Chart.

Vdc INPUT VOLTAGE CHART

DC Volts 12 24 32 36 48 66 108

Designation 1 2 B 3 4 E I

Step 5: To designate AC frequency enter the single character code from the AC frequency chart.

AC FREQUENCY CHART

Frequency
50Hz

60Hz

400Hz

Designation
5

6

4