IPD DC4-150 150W DC-DC Open Frame (Cover Optional) Converter


DC4-150
(PDF)

Features
  • High Efficiency
  • Advanced SMT Design
  • 36-72 VDC Input Range
  • 4250 VDC Input Range to Output Isolation meets reinforced insulation
  • Compact 3"x5"x1.3"
  • Fits 1U Applications
  • Optional Chassis & Cover
  • Safety Certified to EN 60950, EN 60601-1

Safety Specifications
us_ur.gif

Underwriters Laboratories File E137708

UL 60950 Third Edition
UL 60601-1 First Edition
CB Report Per IEC 60950:1999 Third Edition including all National Deviations
CB Report Per IEC 60601-1 (1988) Second Edition, A1, A2

us_ur.gif UL Recognition Mark for Canada File E137708 CAN/CSA-C22.2 No. 60950:00
CAN/CSA-C22.2 No. 601-1-M90
tuv.gif EN 60950:2000
EN 60601-1/A2:1995

Model Listing
Model # Output 1 Output 2 Output 3 Output 4
DC4-150-4001
DC4-150-4002
DC4-150-4003
DC4-150-4004
DC4-150-4005
DC4-150-4006
DC4-150-4007
+3.3V/15A
+5V/15A
+5V/15A
+5V/15A
+5V/15A
+5V/15A
+5V/15A
+5V/8A
+3.3V/8A
+3.3V/8A
-5V/8A
-5V/8A
+24V/3A
+24V/3A
+12V/2A
+12V/2A
+15V/2A
+12V/2A
+15V/2A
+12V/2A
+15V/2A
-12V/2A
-12V/2A
-15V/2A
-12V/2A
-15V/2A
-12V/2A
-15V/2A
DC4-150-3001
DC4-150-3002
+5V/15A
+5V/15A
+12V/4A
+15V/3A
-12V/3A
-15V/2A
DC4-150-2001
DC4-150-2002
DC4-150-2003
DC4-150-2004
DC4-150-2005
+3.3V/15A
+5V/15A
+5V/15A
+12V/7.5A
+15V/5A
+5V/8A
+12V/5A
+24V/3A
-12V/5A
-15V/5A
DC4-150-1001
DC4-150-1002
DC4-150-1003
DC4-150-1004
DC4-150-1005
DC4-150-1006
DC4-150-1007
DC4-150-1008
2.5V/30A
3.3V/30A
5V/30A
12V/12.5A
15V/10A
24V/6.3A
28V/5.4A
48V/3.1A

1


Output Specifications
Total Output Power at 50ºC 100W
150W
Convection Cooled
300 LFM Forced Air Cooled
Output Voltage Centering (50% Load)

Output 1:
Output 2:
Output 3:
Output 4:

±0.5%
±5.0%
±5.0%
±5.0%
Output Voltage Adjust Range Output 1: 95-105%
Load Regulation Output 1:
Output 2:
(4001-5)
(2001)
Output 3:
Output 4:
0.5% (10-100% load change)
5.0% (10-100% load change)
8.0% (10-100% load change)
6.0% (10-100% load change)
5.0% (10-100% load change)
5.0% (10-100% load change)
Source Regulation Outputs 1-4: 0.5%
Cross Regulation Outputs 2-4: 5.0%
Output Noise
Outputs 1-4 1.0%

Transient Response
Voltage Deviation
Recovery Time
Load Change

Outputs 1-4
5.0%
500S
50% to 100%
 
Output Overvoltage Protection Output 1: 110% to 150%
Output Overpower Protection 110-160% rated Pout, cycle on/off, auto recovery
Start Up Time 5 seconds

Input Specifications
Input Voltage Range 36-72VDC
Input Under-Voltage Lockout
Turn-On Voltage
Turn-Off Voltage

29.0-35.0VDC
28.0-34.0VDC

Input Overvoltage Shutdown

77.0-85.0VDC
Mazimum Input Current 6.0A
Reflected Ripple Current 5%
Efficiency 82% Typ., Full Power, 48VDC, varies by model

Environmental Specifications
Ambient Operating Temperature Range 0ºC to +70ºC
Derating: See Power Rating Chart
Ambient Storage Temperature Range -40ºC to +85ºC
Temperature Coefficient Outputs 1-4: 0.02%/ºC
Vibration MIL-STD-810E, Method 514.4, Category 1
Shock Transit drop per MIL -STD-810E, Method 516.4, Procedure IV

General Specifications
Dielectric Strength 4242 VDC, Primary to Secondary, 1 sec.
2121 VDC, Primary to Ground, 1 sec
707VDC, Secondary to Ground, 1 Sec
Good Power Signal Logic high with input voltage above Vin min.
Remote Sense (Singles Only) 250mV compensation of output cable losses
Mean-Time Between Failures 100,000 Hours min, MIL-HDBK-217F, 25ºC, GB
Weight 0.90 Lbs Open Frame
1.60 Lbs Chassis & Cover


[ Last Updated: ]
© 2006 Current Solutions, Inc. All rights reserved.
Contact Us | User Agreement