S6000
DC Input-Output 2U x 3U up to 6000 Watts
(PDF)
|
|
| Description |
The S6000 series realizes a single high power modular solution for bulk DC requirements in a 2U unit. Utilizing up to 4 of the market leading APC500 series DC/DC converters, the S6000 provides one of the most cost-effective and flexible solutions to integrate new and legacy power systems with its added ability to supply STEP-UP conversion from 24VDC or 28VDC to 48VDC output.
Each unit provides up to 2,000W each, and when 3 units are mounted vertically gives a massive 6,000W per 2U high 19" rack, or 4,000W of N+1 redundancy.
Ideal for applications where maximum flexibility for a scalable and cost-effective bulk DC power solution with precisely regulated DC output is required. |
| Features |
- Very flexible modular system
- Step-up conversion 24 up to 48V
- Up to 6,000 watts of total power
- 3 modules in 2U 19-inch Rack
- Integral Oring diodes
- Wide range of DC output voltages: 24VDC, 28VDC, & 48VDC
- ±10% output adjustment range
- Hot plug capability
- Active load sharing
- Temperature monitor indication
- Remote sensing
- Overvoltage protection
- Group output voltage adjustment
- Cost effective custom designs
- Class B EMI filter
|
| Input Specifications |
Input DC Voltage Range |
18V to 36V |
|
36V to 75V |
Maximum Input Protection, Internal Fuse |
4 x 40A |
Input current, full load |
104A |
Input EMI filter, Conducted |
EN55022 Curve B |
| Typical at Nominal Line, Full load and 25°C unless otherwise stated |
| Output Specifications (of D2000 Module) |
Total output power, max |
2000W |
Output voltages |
24, 28 & 48V |
Output current (@48V) |
41.67A |
Voltage adjustment Range |
±10% |
Total Regulation |
±1.0% |
| Ripple and noise Pk-Pk |
500mV, 48V modules |
| Dynamic Response |
1ms |
| Temperature Coefficient |
0.05%/°C |
| Minimum Load |
0A |
| Overload Protection |
Constant Current Limiting |
| Overvoltage Protection |
Latched Shutdown / Reset |
| Active Current Share |
10% Differential from rated current |
| Remote Sense |
Up to 1V per wire |
| Efficiency |
> 85% at full load |
| Sync Control Range |
320-360kHz, Nominal 330kHz |
| General Specifications |
Switching Frequency, DC/DC converter |
150kHz nom. |
Overtemperature shutdown |
Auto recovery |
Isolation, class 1 |
2000 VAC Input - Output |
|
1500VAC Input - Ground |
|
500VAC Output - Ground |
| Status Indicators |
Power Good |
Logic Low Output |
Thermal Alarm |
Logic Low Output |
| Environmental Specifications |
Operating Temperature |
0°C to 70°C Ambient |
Derating |
1.0%/°C, 50°C to 70°C |
Storage Temperature |
-40°C to 85°C |
Cooling |
Internal DC Ball-Bearing fans |
| Physical Specifications |
Case material |
Aluminum |
Dimensions |
5" x 3.39" x 14.1"
127 mm x 86mm x 257mm |
Weight |
2.8kg - 6.16lbs |
|
