DT410U Series 10-15W Wall Mount Power Supply |
DT410U Series
10-15 Watts Wallmount
(PDF) |
 |
| Description |
|
DT410U Series is a 10-15 watt wall mount switching power supply. It comes with an IEC EN603220/C7 (2 wire) AC inlet to accommodate worldwide applications. These power supplies are perfect for low power applications such as: Telecommunications equipment, modems and other products that require an external power source. With TRI-MAG leadership in universal power supply technology, we have been able to incorporate our proven design into this space saving wall mount unit.
|
| Features |
- EMI FCC Class B
- No minimum load required
- Single Output
- Universal input 90VAC to 260VAC
|
| Applications |
- Computer Peripherals
- Modems
- Telecommunications
- Test Instrumentation Product
- Data Acquisition
- Medical
|
| General Specifications |
| Line Voltage |
90VAC to 260VAC |
| Input Frequency |
47-63Hz |
| Inrush Current (Cold) |
Depends on model; 115VAC, 230VAC |
| Operating Temperature |
0 to 50ºC |
| Storage Temperature |
-20ºC to 85ºC |
| Cooling |
Free Air Convection |
| Efficiency |
70% Typical |
| Holdup Time |
20ms at 115VAC |
| Overvoltage Type |
Crowbar |
| Overload Protection |
Foldback within 150% rated load |
| Switching Frequency |
> 30KHz |
Safety:
Designed in full compliance with |
UL 1950
CSA 22.2 #234
VDE EN60950 |
| EMI |
Meets FCC Class B |
| Mechanical Specifications |
Tolerance: +/-0.39" (1mm) except length of cable
Case Size: Base Unit is 3.66" x 2.05" x 1.30" (93 x 52 x 33)
Connectors: See drawing
Length of cable: 5ft. |
| Output Specifications |
Model |
Watts |
Voltage (VDC) |
Load (A) |
Tolerance ± |
Ripple & Noise |
Regualtion |
Min. |
Rate |
Peak |
Line |
Load |
DT410U-4 |
12 |
+5V |
0 |
2.4 |
3.0 |
1% |
50mV |
1% |
3% |
DT410U-5 |
12 |
+12V |
0 |
1.0 |
1.8 |
1% |
100mV |
1% |
3% |
DT410U-6 |
12 |
+24V |
0 |
0.5 |
0.9 |
1% |
150mV |
1% |
3% |
DT410U-20 |
12 |
+7.1V |
0 |
1.7 |
2.5 |
1% |
100mV |
1% |
3% |
|
[ Last Updated:
]
© 2006 Current Solutions, Inc. All rights reserved.
Contact
Us | User
Agreement