Power Supplies - Current Solutions, Inc. - Your OEM Power Source Allies

Hot Swap / Redundant Series

Hot Swap & Redundant Series (45-300 Watts - PDF)

Description

The latest technology and topology is used to design this series. This technology efficiently delivers the maximum output of continuous power and lower minimum load requirements. This topology also assures very high reliability and performance.

Features	Applications
High Efficiency Low Cost Low Output Noise High Surge Output Overload Protection Short Circuit Protection 100% Hi-pot Tested 100% Cycling On-Off Burn-in Test Built-in Line Filter FCC Class B and VDE Class B	Personal Computers Industrial Computers Telecommunications Process Control Equipment Instrumentation Robotics Work Stations LAN Equipment Medical

General Specifications
Line Input	a) 90 VAC to 132 VAC or 180 VAC to 264 VAC, 47Hz to 63Hz b) -48 VDC (DC48 Model) c) 24 VDC (DC24 Model)
Output Power	See Specifications
Output Adjustable	Main Output ±10%
Efficiency	70% Typical
Holdup Time	(115V) 20ms
Isolation	3750 VAC
Operating Temperature	0 to 50ºC
Storage Temperature	-20ºC to 85ºC
Temperature Coefficient	0/02% / C
Ripple Voltage	See Specifications
In full compliance with:	UL 1950 CSA 22.2 #234 TUV IEC950 EN60950

Model	Voltage (VDC)	Load (A)			Tolerance ±	Ripple & Noise	Load/Line Regulation	Note
Model	Voltage (VDC)	Min.	Rate	Peak	Tolerance ±	Ripple & Noise	Load/Line Regulation	Note
MFSP-047 45W	+5V +12V	1.0 0	3.0 2.5	6.0 3.0	5% 5%	50mV 120mV	±2% ±5%	Adjust @ +5.15V & +12.4V
TMG-R063 60W	+5V +12V	0 0	3.5 4.0	5.0 11.0	5% 5%	50mV 120mV	±2% ±5%	1
TMG-R083 80W	+5V +12V	0 0	7.0/4.5 4.0/5.0	10.0/6.5 7.0/14.5	5% 5%	50mV 120mV	±2% ±5%	1
TMG-R153 150W	+5V +12V	0 0	6.0 10.0	8.0 20.0	5% 5%	50mV 120mV	±2% ±5%	1
TMG-R230 200W	+5V +12V -5V -12V	4.0 1.0 0.1 0.1	20.0 10.0 0.5 0.5	25.0 12.0 1.0 1.0	5% 5% 5% 5%	50mV 100mV 100mV 100mV	±4% ±5% ±2% ±2%	1
ATX-R300 300W	+3.3V +5V +12V -12V -5V	0 1.0 0 0 0	7.5 17.0 16.0 0.5 0.5	10.0 25.0 20.0 - -	5% 5% 5% 5% 5%	50mV 50mV 100mV 120mV 100mV	±3% ±3% ±5% ±5% ±5%	Total Combined output power on 3.3V & 5V is 120 watts
AT-R230RD 200W	+5V +12V -5V -12V	4.0 1.0 0.1 0.1	20.0 10.0 0.5 0.5	25.0 12.0 1.0 1.0	5% 5% 5% 5%	50mV 100mV 100mV 120mV	±4% ±5% ±5% ±5%	11
AT-250RD 250W	+5V +12V -5V -12V	4.0 1.0 0.1 0.1	25.0 10.0 0.5 0.5	30.0 14.0 1.0 1.0	5% 5% 5% 5%	50mV 100mV 100mV 100mV	±4% ±5% ±5% ±5%	1
ATX-250RD 250W	+3.3V +5V +12V -5V -12V +5VBS	0 3.0 1.0 0 0 0	20.0 25.0 10.0 0.5 0.5 0.75	- 30.0 14.0 1.0 1.0 -	5% 5% 5% 5% 5% 5%	50mV 50mV 100mV 100mV 120mV -	±4% ±5% ±5% ±5% ±5% -	1
ATX-300RD 300W	+3.3V +5V +12V -5V -12V	0 1.0 0 0 0	7.5 17.0 16.0 0.5 0.5	10.0 25.0 20.0 - -	5% 5% 5% 5% 5%	50mV 50mV 100mV 100mV 100mV	±3% ±3% ±5% ±5% ±5%	Total Combined output power on 3.3V & 5V is 120 watts
DC48-2250RD 250W	+5V +12V -12V -5V	3.0 1.0 0 0	25.0 10.0 0.5 0.5	30.0 14.0 1.0 1.0	5% 5% 10% 10%	50mV 100mV 120mV 100mV	±4% ±5% ±5% ±5%	-48 VDC Input
DC48-2250ATXRD 250W	+3.3V +5V +12V -5V -12V +5VBS	0 3.0 1.0 0 0 -	15.0 25.0 10.0 0.5 0.5 0.75	20.0 30.0 14.0 1.0 1.0 -	5% 5% 5% 10% 10% -	50mV 50mV 120mV 100mV 120mV -	±4% ±4% ±5% ±5% ±5% -	-48 VDC Input
DC48-R300RD 300W	+5V +12V -12V -5V	1.0 1.0 0.1 0.1	42.0 6.0 1.0 1.0	47.0 12.0 2.0 2.0	5% 5% 5% 5%	50mV 100mV 120mV 100mV	±4% ±5% ±5% ±5%	-48 VDC Input
DC48-R300ATXRD 300W	+3.3V +5V +12V -12V -5V	0 1.0 1.0 0.1 0.1	12.0 42.0 6.0 1.0 1.0	15.0 47.0 12.0 2.0 2.0	5% 5% 5% 5% 5%	50mV 50mV 100mV 120mV 120mV	±4% ±5% ±5% ±5% ±5%	-48 VDC Input
DC48-R300 300W	+5V +12V -5V -12V	1.0 1.0 0.1 0.1	42.0 6.0 1.0 1.0	47.0 12.0 2.0 2.0	5% 5% 5% 5%	50mV 100mV 120mV 100mV	±4% ±5% ±5% ±5%	-48 VDC Input
DC48-R300ATX 300W	+3.3V +5V +12V -12V -5V	0 1.0 1.0 0.1 0.1	12.0 42.0 6.0 1.0 1.0	15.0 47.0 12.0 2.0 2.0	5% 5% 5% 5% 5%	50mV 50mV 100mV 120mV 120mV	±4% ±4% ±5% ±5% ±5%	-48 VDC Input