PS5200
200 Watt
(PDF) |
 |
| Description |
The latest technology and topology is used to design this series. This technology efficiently delivers the maximum output of continous power and lower minimum load requirements. This topology also assures very high reliability and performance. |
| Features |
Applications |
- High Efficiency
- Low Cost
- Low Output Noise
- High Surge Output
- Overload Protection
- Short Circuit Protection
- 100% Hi-pot tested
- 100% Cycling On-Off Burn-in Test
- Built-in line filter FCC Class B and VDE Class B
- Power Good Signal
- Built-in Fan for cooling
- Remove On-Off Switch
- Remote Sense
- Thermal Protection
|
- Personal Computers
- Industrial Computers
- Work Stations
- Process Control Equipment
- Robotics
- Instrumentation
- Telecommunications
|
| General Specifications |
| Input Voltage |
90 VAC to 132 VAC or 180 VAC to 264 VAC, 47Hz to 63Hz |
| Output Power |
See Specifications |
| Output Adjustable |
Main Output ±10% |
| Efficiency |
70% Typical |
| Operating Temperature |
0 to 50ºC |
| Storage Temperature |
-20ºC to +85ºC |
| Temperature Coefficient |
0/02% / C |
| Ripple Voltage |
See Specifications |
| Holdup Time |
Trip Point, 6.2V ±0.4V or Rated Output +3V |
| Short Circuit Protection |
All Output |
| In Full Compliance With: |
UL 1950, CSA 22.2 #234, VDE EN60950 |
Model |
Voltage (VDC) |
Load (A) |
Tolerance
± |
Ripple & Noise |
Regulation |
Min. |
Rate |
Peak |
Line |
Load |
PS5200-6 |
+5V |
3.5 |
40 |
- |
1% |
50mV |
1% |
3% |
PS5200-7 |
+12V |
2.0 |
16.6 |
18.8 |
1% |
100mV |
1% |
3% |
PS5200-8 |
+15V |
1.3 |
13.3 |
- |
1% |
100mV |
1% |
3% |
PS5200-9 |
+24V |
0.8 |
8.3 |
- |
1% |
200mV |
1% |
3% |
PS5200-14 |
+48V |
0.4 |
4.1 |
- |
1% |
300mV |
1% |
3% |
|